The reason for not cooling the refrigerator – Zomit

The reason for not cooling the refrigerator – Zomit


Sometimes you want to use the refrigerator immediately after moving; But the refrigerator does not work and does not cool. What is the reason for this problem and what should you do? Continue to stay with us.

In what condition is the refrigerator moved?

The condition of the refrigerator during transportation is important to help diagnose the problem. If possible, when transporting the refrigerator, it should be placed in an upright position.

When the refrigerator arrives at your residence, be sure to check the position of the refrigerator inside the truck before moving it to the desired location and note whether it is vertical or not. You can take a photo of the transfer mode to have a document to prove later if there is a problem with the refrigerator.

The refrigerator was moved into the kitchen; What is the assignment?

The important thing in moving a refrigerator is to know that many materials such as compressor oil are vibrating and moving during their movement. After moving the refrigerator to a fixed place, you should note that it takes time for it to work properly.

Therefore, it is recommended that if you want to start using the refrigerator, wait at least four hours before plugging it in. This should allow enough time for the oil, gasses and coolant to be where they should be.

If your refrigerator has been moved horizontally, it is even better to wait up to twenty-four hours. Why is the resting time in this position longer than the vertical position? The reason for this is related to the compressor and the oil in it. If you move the refrigerator horizontally, more pressure is applied to the compressor than if it is moved vertically, causing the compressor oil to leak into the refrigerant path.

Therefore, it is important to allow the oil to return from the cooling path to the compressor before turning on the refrigerator after it is in place.

Moving the refrigerator vertically does not pose the risk of this type of leakage. For this reason, it is recommended to allocate more time to rest in case of horizontal transportation.

If, after moving, you immediately plug in the refrigerator and you don’t feel any cooling, unfortunately, there is a possibility that the compressor needs to be repaired or completely replaced. However, you should contact a specialist for an accurate diagnosis.

The refrigerator was moved and rested; But it still doesn’t cool down

This issue can be related to several electrical items. Is the electricity connected? Check the outlet the refrigerator is plugged into and make sure there is electricity. Sometimes the problem is with the outlet. This could be related to faulty house wiring or just an outlet that cannot handle the load of the refrigerator. At this stage, the plug must be replaced.

It could also be a more complicated electrical issue. Is the power meter switch on? Because sometimes the problem is with the meter.

When should we call an expert to repair a refrigerator that does not cool?

If you have checked all the reasons and your refrigerator still does not cool properly, there may be a malfunction in one of the internal parts such as the evaporator fan, condenser fan, compressor, thermostat or compressor start relay. Repairing and replacing these parts can be complicated and is best left to a professional.


Source link


No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *