How to service the water heater

Holes and leaking radiators are usually due to not being serviced on time. It is worth mentioning that the oldness of the device and its wear and tear also play an important role in the decay of the radiators.

• Inside the radiators are fin-like grids that, if they are rotted and punctured, there is no way to repair them.
• To detect decay and holes, it is enough to see if the deposition has spread to the outside or not.
• Usually, if there is a hole, the deposits will appear as scale on the radiator.

• Silver welding: This type of welding is done only to repair the available parts of radiators; It means welding the pipes of the outer part, which is a completely temporary operation.
• piping: Tubing is done to repair the internal parts of the radiators; But in general, piping and this type of repair is completely temporary and has little impact.

tip: If your radiators are more worn and old than reasonable, it is better to replace them as soon as possible and not incur additional costs.

To reduce the cost of replacement, you can sell your old radiators as scrap or so-called “hot”. This is a kind of exchange plan, if you agree, you can exchange your old radiators with new ones and settle the rest of the amount with the seller.

In this method, we open the water heater pump and separate all its components, and then by placing brass pieces, we scale it in acid.

Water heater water pump includes a number of o-rings and washers that wear out after a while and need to be replaced. The name of this collection of tools and parts is a complete water heater pump service kit.

After installing and setting up the water heater, try to open all the faucets in your home and drain the sand and sediment behind it. Sometimes when you turn on the hot water faucet, your water pressure may be lower than the cold water. The main reason for this issue is a clogged faucet; But if your problem is not solved after the valves are scaled, know that the problem is with the main pipes.

tip: To service your faucets, first open them and remove the valve’s mesh-shaped series from the main body. Then, by pouring a little scale remover into the milk ducts, allow the scale and sediment to come out and leave the scale remover in the milk ducts for a few minutes, and then wash the entire milk ducts with strong water until all the scale and blockages are washed and thrown out.