News

Intel Celeron G6900 Alderlik’s performance is not satisfactory in AAA gaming

Earlier this week, a report was released showing how the new Celeron G6900 processor from Intel’s twelfth-generation Alderlick family is compatible with the Alderlick Core i9-10900K in terms of mono-performance. In addition, the results of the Kig Bench benchmark show the strength of the new Golden Cove cores. However, it is better to examine the performance of the processor in the real world. The Tomhardhard website has reviewed the performance of several different game titles on the Intel Celeron G6900 processor, the results of which we will examine below.

To summarize, let’s take a look at the specs of the Intel Celeron G6900. This chip uses dual-core Golden Cove without hyperterding support. The core frequency of this processor is 3.4 GHz and it uses 4 MB of smart cache and 2.5 MB of L2 cache. The processor supports DDR4-3200 to DDR4-4800 memory and has an Intel iGPU UHD Graphics 710 graphics processor with a working frequency of up to 1.3 GHz and a TDP of 46 watts (actual power consumption).

Celeron G6900

When testing the base model of the AlderLike series, which costs about $ 42, the chip was placed on the cheapest motherboard it supports. The motherboard of choice for this review was the $ 110 Intel LGA1700 motherboard. Not to mention that this system is also equipped with 16 GB of DDR4-3000 RAM.

The website of Tomhardhardor refers to the storage space of the mentioned system Did not mention; But the graphics processor to test the game was Nvidia T1000. This graphics card has specifications similar to the GTX 1650. The reason for choosing the T1000 was that it was more reasonably priced and more affordable than the GTX 1650. Due to the technical specifications of this system, it is expected that it will play most new and old games.

Watch on YouTube

The results showed that The Witcher 3 ran at 1080p with an average of 43 frames per second. In addition, the game mentioned on this system has faced long intermittent freezes. The system also runs GTA San Andreas in 1080p at an average rate of 58 frames per second; But the problems caused by the slowdown in the implementation of this title have been more bearable.

Not to mention that the 1080p Cyberpunk 2077 game has been run on this system at an average rate of 47 frames per second, which in less than 1% of the game times reached less than 11 frames per second. However, this game has a bigger problem; Because it does not download stored games. Of course, it does not make much sense to object to this problem; Because the number of Celeron cores is less than the minimum number of cores required to run this game, two cores.

The system has performed satisfactorily in 1080p Dust II; As the average frame rate of this game was 120 frames per second, which in 1% of cases has reached less than 42 frames per second.

Game test on Celeron G6900

Subsequently, Forza Horizon 5 and Fortnite had difficulty loading the page, and Far Cry 6 and GTA 5 ran so slowly that they could not be played. Finally, Red Dead REdemtion 2 runs at 1080p at 34 frames per second.

Related articles:

Another important observation in this study is that when playing games, the CPU processing load was about 100%; While the GPU is not really under pressure. This means that the system is not an ideal option for gaming.

Finally, the Thomhardhard website notes that using the G6900 instead of the older processors in this series of Intel chips will not improve your system performance significantly. However, in an optimistic note, he also mentioned the Pentium Gold G7400. The new Pentium processors are improved in some respects compared to the Celeron, including a 2C / 4T configuration with a operating frequency of 3.7 GHz and double the smart cache.


Source link

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker